Standard Features:  Heavy duty construction with ½” solid steel doors. Handle activated locking mechanism consisting of three 1″ diameter locking bolts. Bolt detent device automatically engages bolts when doors are closed. Auxiliary spring-loaded relocking device, activated by a punch attack.     Door:  Locks and relocks are protected by a large carburized hardplate. Formed door jamb and full length dead bar. Coin racks are standard on inside of storage door.     Body:  Fish resistant depository drops accept bulk items, drop envelopes or bags. Cash drawers and bulky items conveniently fit into both compartments. Three individual color-coded 4″ drops for shift control. Three deposit bins provided.

Actuated by Permanent Magnet, Emits Pleasant Chime Tone When Door is Opened. No Batteries or Electricity Needed. Manual Shut Off. Easy Installation. Available in Bronze Color. Works on Doors That Swing Open in One Direction Only (Either In or Out) But Not Both Ways. If You Have Double Doors, You Will Need 2 Chimes, One for Each Side.

With anti-fish deposit slot. 6"x6"x12".

Heavy duty 1/2" steel door. 20.25"x14"x14". Weight: 94 lbs.

Heavy duty 1/2" steel door. 27.25"x14"x14". Weight: 120 lbs.

Easy Reach Design Allows Quick Access for Walk-up, Drive-up or Mobility Impaired Customers. ?UL Approved for Level 1 Bullet Resistance With a Level 3 Bullet Resistant Insert in Faceplate. Large Transfer Area Handles Bulky Items Up to Gallon-Sized Containers and Twelve Packs. Brushed Stainless Steel Finish. Some Assembly Required. Overall Size: 21-3/4"Wx14-15/16"Hx16-3/4"L. Transfer Area: 18-15/64"Wx9-1/2"Hx14-9/32"L.

1.25"x3.5". Clear with bluish tint, for Tacc II-R and II-EAC. (40/box).

1.375"x3.5". Clear with grayish tint, for Tacc-IIA, CII and IV. (40/pack).

1.5"x3.5" Clear, With Plastic Cap. (20/Box)

1.25"x3.5". Clear, With Plastic Cap. (20/Box)

With Female 1/4" Thread.

With Female 3/4" Hose Thread.

With Female 1/4" NPT Thread.

Lid Dispenser, built-in, 2 section, 18"H x 7"W x 5-1/2"D, 16-3/4" x 5-5/8" cut-out, polystyrene with 304 Series stainless steel faceplate, black and stainless steel

Lid Dispenser, built-in, 3 section, 26"H x 7"W x 5-1/2"D, 24-5/8" x 5-5/8" cut-out, polystyrene with 304 Series stainless steel faceplate, black and stainless steel